Folger Tech FT-5 Dual Z Stepper/Endstop Mod

SPECIAL THANKS TO MARVINMARTIAN ON THE FOLGER FORUM FOR INSPIRING THIS MOD. THIS MOD IS BASICALLY THAT, WITH A LITTLE MORE MODS TO FIRMWARE TO WORK CORRECTLY. CHECK OUT THE FOLGER FORUM POST FOR THE ORIGINAL IDEA.

HTTP://FOLGERFORUM.COM/T/TROUBLE-GETTING-DUAL-Z-END-STOPS-DUAL-Z-STEPPERS-WORKING/889/

ZIP FILE AT THE BOTTOM

YOU WILL NEED

-HTTP://WWW.THINGIVERSE.COM/THING:2070617 <<TWO PAIR OF THE ENDSTOP HOLDERS
-M5X10MM BOLT X4
-M5 T-NUT X4
-M3X(10-16MM) BOLT X4
-M3X(30-45MM) BOLT X2
-M3 LOCK NUT X4
-ENDSTOP AND WIRES X2 (SHOULD ALREADY HAVE ONE STOCK)
-EXTRA MOTOR WIRE (JST-XH OR DUPONT ENDS WILL BOTH WORK ON THE MKS)

FOLLOW THE GUIDE IN THE ZIP FILE TO ASSEMBLE THIS PROPERLY

ft5_dual_z_endstop_dual_z_stepper_guide <Click to Download

Project Link - http://dustincorbin.weebly.com/blog/folger-tech-ft-5-dual-z-stepperendstops-mod Original Post - http://folgerforum.com/t/trouble-getting-dual-z-end-stops-dual-z-steppers-working/889 Folger Tech Facebook Group - https://www.facebook.com/groups/Folgertech3dPrinters/ SUBSCRIBE - https://www.youtube.com/c/DustinCorbin?sub_confirmation=1 Follow me on Twitter - https://twitter.com/djcdude95 Use my Amazon Affiliate link to help support this channel! -http://amzn.to/2ePNovz